Cooling system -FDA Approved Non-stick cooling belt -5HP Air cooling with designed enclosed cooling tunnel -Electrical cabinet with 0-20C temperature and humidity control All molds are Teflon coated aluminum with ejection pin, allowing quick release of gummies. Special design of the mold installation structure makes it exceptionally easy for assembly and disassembly by hands. Demolding plates coupled with dual brushes and air blowing allows for efficient and easy ejection G-80 Automatic Gummy Production Equipment This unit comes standard with an auto-dosing system, inline mixing system, 15’ of cooling tunnel and an automatic de-molding mechanism. It has dosing pump for automatic injection of colors, flavours and acids to make your operate fully automatically. Perfect for small to medium gummy production runs, this standalone gummy production line is capable of producing up to 30,000 gummies an hour. With speeds up from 30, ,000 gummies per hour, it is perfect for small to large production runs. G-80 Fully-Automated Gummy Depositor Line It measures the amount of sucrose in a sample, allowing you to get accurate measurements of the sugar content in your tasty treats.Dosing pump transfer the ingredients to premix with syrup.● Built-in automatic temperature control to make sure all results are accurate 100% of the time.Semi continuous cooking system for both pectin/gelatin gummy -1x 150L Jacket heated Pectin and sugar dissolving tank with High shear mixer and variable speed drive.Special design of the mold installation structure makes it exceptionally easy for assembly and disassembly by hands.It has PLC control system and LED touch panel for easy operating.The G series Automatic Gummy Production Equipment is a stand-alone system capable of full production duties. Simply wait till your sugar solution has cooled and take your reading.● A replaceable daylight plate that will save you thousands of dollars by avoiding replacing the whole refractometer. It’s designed to last as long as you’re making delicious treats, and to serve your operations no matter how many times you use it every day.With accurate measurements, easy calibration, and a durable build, you can act on your passion for making candy without having to think twice. Your options are slim, especially if you’re in the market for purpose-made refractometers to measure sugar content in your candy, all you’re met with are cheaply-made, very fragile, and expensive-to-replace products. Whether you’re making candy on the weekends to impress your family and friends, or you’re running a large-scale candy production facility, your tools are what sets you apart from your competition and maintain the same results over time! G-Series fully auto gummy line This candy-maker's refractometer has an easy-to-use handheld design, temperature compensation, and includes a handy case for safe storage.A Reliable, Sustainable Solution For Ensuring Quality Results In Every Batch Of Candy You Make! It measures the amount of sucrose in a sample, allowing you to get accurate measurements of the sugar content in your tasty treats. All depositor purchases include a 15% discount on any future orders for stock and custom molds! It is the perfect gummy production line to help you scale up your production.This unit comes standard with an auto-dosing system, inline mixing system, 15’ of cooling tunnel and an automatic de-molding mechanism.All depositor purchases include a 15% discount on any future orders for stock and custom molds!Sprays oil onto tooling molds to allow easy release of molded productDemolding plates coupled with dual brushes and air blowing allows for efficient and easy ejectionWith accurate measurements, easy calibration, and a durable build, you can act on your passion for making candy without having to think twice.Integral dosing system allows the quick addition of ingredients, such as CBD/Vitamin, colors.With speeds up to 30,000 gummies per hour, it is perfect for small to medium production runs.Automatic adjustment for easy fill volume changes. G-80 Fully-Automated Gummy Depositor Line Sprays oil onto tooling molds to allow easy release of molded product Dosing pump transfer the ingredients to premix with syrup. Integral dosing system allows the quick addition of ingredients, such as CBD/Vitamin, colors. It has PLC control system and LED touch panel for easy operating. We ensure prompt responses to all your requests, and we’ll train your technicians and operators on how to safely set up and run our equipment.This candy-maker's refractometer has an easy-to-use handheld design, temperature compensation, and includes a handy case for safe storage.A Reliable, Sustainable Solution For Ensuring Quality Results In Every Batch Of Candy You Make!Whether you’re making candy on the weekends to impress your family and friends, or you’re running a large-scale candy production facility, your tools are what sets you apart from your competition and maintain the same results over time!Depositing and demolding system -Servo driven and Siemens PLC control -Auto mold lubrication system -Teflon coated 20 cavity metal mold with ejection pins -Quick release mold set of 160 pcs -hopper heating system -Dual hopper as options for dual color and central filled gummy -LED HMI 10′ Siemens Touch Screen -Dual brash and air blowing demolding deviceThis equipment can produce gummies in one or two colors.It’s designed to last as long as you’re making delicious treats, and to serve your operations no matter how many times you use it every day.With accurate measurements, easy calibration, and a durable build, you can act on your passion for making candy without having to think twice. G-Series fully auto gummy line Depositing and demolding system -Servo driven and Siemens PLC control -Auto mold lubrication system -Teflon coated 20 cavity metal mold with ejection pins -Quick release mold set of 160 pcs -hopper heating system -Dual hopper as options for dual color and central filled gummy -LED HMI 10′ Siemens Touch Screen -Dual brash and air blowing demolding device CFA Dosing System -Static and inline mixers for colors, flavors and Acid -4x20L tanks and dosing pumps for CFA Saintyco G-80 Automatic Gummy Production Equipment is a stand-alone system capable of full production duties.With speeds up to gummies per hour, it is perfect for small to medium production runs. ● Built-in automatic temperature control to make sure all results are accurate 100% of the time. Especially when it comes to measuring Brix in your sugar solutions, it’s crucial to always get the same measurements to make sure you’re leaving no room for mold to grow and keeping the same consistency and taste. LED touch panel for easy operatingSpecially designed de-moulding device With a user-friendly PLC control system and an LED touch panel, operating the system becomes effortless. It measures the amount of sucrose in a sample, allowing you to get accurate measurements of the sugar content in your tasty treats.Fill volume range 1-15g.Dual hoppers for two colors and center filled as options.It has dosing pump for automatic injection of colors, flavours and acids to make your operate fully automatically.Semi continuous cooking system for both pectin/gelatin gummy -1x 150L Jacket heated Pectin and sugar dissolving tank with High shear mixer and variable speed drive.CFA Dosing System -Static and inline mixers for colors, flavors and Acid -4x20L tanks and dosing pumps for CFADosing pump transfer the ingredients to premix with syrup.Special design of the mold installation structure makes it exceptionally easy for assembly and disassembly by hands.The G series Automatic Gummy Production Equipment is a stand-alone system capable of full production duties.It has PLC control system and LED touch panel for easy operating. It is the perfect gummy production line to help you scale up your production.This unit comes standard with an auto-dosing system, inline mixing system, 15’ of cooling tunnel and an automatic de-molding mechanism. Semi continuous cooking system for both pectin/gelatin gummy -1x 150L Jacket heated Pectin and sugar dissolving tank with High shear mixer and variable speed drive. Batch Cooking System for pectin gummy -1x 150L Jacket heated Pectin and sugar dissolving tank with High shear mixer and variable speed drive. Saintyco G-80 Automatic Gummy Production Equipment is a stand-alone system capable of full production duties.With speeds up to gummies per hour, it is perfect for small to medium production runs.Saintyco G-80 Automatic Gummy Production Equipment matches special designed de-moulding device, by change different moulds to help you make many kinds of shapes gummies.Simply wait till your sugar solution has cooled and take your reading.● A replaceable daylight plate that will save you thousands of dollars by avoiding replacing the whole refractometer.Optional equipment includes a sugar coating drum and conveyor system, spares package and a kettle cooking system w/ transfer piping.Batch Cooking System for pectin gummy -1x 150L Jacket heated Pectin and sugar dissolving tank with High shear mixer and variable speed drive.LED touch panel for easy operatingSpecially designed de-moulding devicePerfect for small to medium gummy production runs, this standalone gummy production line is capable of producing up to 30,000 gummies an hour. This equipment can produce gummies in one or two colours.This unit comes standard with an auto-dosing system, inline mixing system, 15’ of cooling tunnel and an automatic de-molding mechanism.Whether you’re making candy on the weekends to impress your family and friends, or you’re running a large-scale candy production facility, your tools are what sets you apart from your competition and maintain the same results over time!The G80 Automatic Gummy Production Equipment is a stand-alone system capable of full production duties.This candy-maker's refractometer has an easy-to-use handheld design, temperature compensation, and includes a handy case for safe storage.A Reliable, Sustainable Solution For Ensuring Quality Results In Every Batch Of Candy You Make!With speeds up from 30, ,000 gummies per hour, it is perfect for small to large production runs.Depositing and demolding system -Servo driven and Siemens PLC control -Auto mold lubrication system -Teflon coated 20 cavity metal mold with ejection pins -Quick release mold set of 160 pcs -hopper heating system -Dual hopper as options for dual color and central filled gummy -LED HMI 10′ Siemens Touch Screen -Dual brash and air blowing demolding deviceThis equipment can produce gummies in one or two colors.Cooling system -FDA Approved Non-stick cooling belt -5HP Air cooling with designed enclosed cooling tunnel -Electrical cabinet with 0-20C temperature and humidity control Saintyco G-80 Automatic Gummy Production Equipment matches special designed de-moulding device, by change different moulds to help you make many kinds of shapes gummies. The production capacity of Saintyco G-80 Automatic Gummy Production Equipment is Up to 80kgs/h. The G80 Automatic Gummy Production Equipment is a stand-alone system capable of full production duties. With accurate measurements, easy calibration, and a durable build, you can act on your passion for making candy without having to think twice. The G series Automatic Gummy Production Equipment is a stand-alone system capable of full production duties. Mold customization is available based on your gummy design and dimensions. Fill volume range 1-15g.Dual hoppers for two colors and center filled as options. Automatic adjustment for easy fill volume changes. We ensure prompt responses to all your requests, and we’ll train your technicians and operators on how to safely set up and run our equipment. Automatic adjustment for easy fill volume changes.Demolding plates coupled with dual brushes and air blowing allows for efficient and easy ejectionAll depositor purchases include a 15% discount on any future orders for stock and custom molds!The production capacity of Saintyco G-80 Automatic Gummy Production Equipment is Up to 80kgs/h.Integral dosing system allows the quick addition of ingredients, such as CBD/Vitamin, colors.It has dosing pump for automatic injection of colors, flavours and acids to make your operate fully automatically.Sprays oil onto tooling molds to allow easy release of molded productFill volume range 1-15g.Dual hoppers for two colors and center filled as options. This equipment can produce gummies in one or two colors. With speeds up to 30,000 gummies per hour, it is perfect for small to medium production runs. Optional equipment includes a sugar coating drum and conveyor system, spares package and a kettle cooking system w/ transfer piping. This equipment can produce gummies in one or two colours.